This very simple circuit will turn off anything when you shutdown your computer. It works by using the power of the usb port to turn on a relay. When your computer is off the usb port has no power and the relay opens the circuits to the devices that are plugged in.

Contents 1 Parts 2 Steps 3 Pictorial Diagram 4 Credits

PartsEdit

• 1 Relay:
  • If you plan on using less than 1A; Get 1-Amp SPDT Micro Relay-5VDC Model: 275-240 at Radio Shack
  • More than 1A: Part #255-1103-ND from http://www.digikey.com
• power cord and socket, you can use a power strip
• USB Cable

Cost Time Difficulty Age Group 20$US 30m easy 12+

About:Ratings

StepsEdit

1. Cut the usb cord, keeping the computer side long.
   • ie cut the B-plug off
2. Strip the +5 and ground wires
   • the 1 and 4 wire ,probable black and red. See USB pinout below
3. Solder wires to the coil of the relay.
4. Cut one of the power cords wires and solder one end to normally open (NO) and the other end to common.

Pictorial DiagramEdit

CreditsEdit

• Designed and published by User:ZyMOS
  
  
  From HowTo Wiki, a Wikia wiki.