Howto configure the Linux kernel / drivers / usb / image

USB Imageing devices configuration
  • Option: USB_MDC800
    • Kernel Versions: ...
    • (on/off/module) USB Mustek MDC800 Digital Camera support (EXPERIMENTAL)
    • depends on USB && EXPERIMENTAL
      Say Y here if you want to connect this type of still camera to your computer's USB port. This driver can be used with gphoto 0.4.3 and higher (look at <>). To use it create a device node with "mknod /dev/mustek c 180 32" and configure it in your software.
      To compile this driver as a module, choose M here: the module will be called mdc800.

  • Option: USB_MICROTEK
    • Kernel Versions: ...
    • (on/off/module) Microtek X6USB scanner support
    • depends on USB && SCSI
      Say Y here if you want support for the Microtek X6USB and possibly the Phantom 336CX, Phantom C6 and ScanMaker V6U(S)L. Support for anything but the X6 is experimental. Please report failures and successes. The scanner will appear as a scsi generic device to the rest of the system. Scsi support is required. This driver can be compiled as a module, called microtek.

Linux Kernel Configuration

Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.