Wikia

How To Wiki

How to configure the Linux kernel/drivers/usb/atm

< How to configure the Linux kernel | drivers | usb

1,795pages on
this wiki
Talk0

Howto configure the Linux kernel / drivers / usb / atm


USB/ATM DSL configuration

USB DSL modem supportEdit

    • depends on USB


  • Option: USB_ATM
    • Kernel Versions: 2.6.15.6 ...
    • (on/off/module) USB DSL modem support
    • depends on USB && ATM
    • select CRC32
    • default n
      Say Y here if you want to connect a USB Digital Subscriber Line (DSL) modem to your computer's USB port. You will then need to choose your modem from the list below.
      To compile this driver as a module, choose M here: the module will be called usbatm.


  • Option: USB_SPEEDTOUCH
    • Kernel Versions: 2.6.15.6 ...
    • (on/off/module) Speedtouch USB support
    • depends on USB_ATM
    • select FW_LOADER
      Say Y here if you have an SpeedTouch USB or SpeedTouch 330 modem. In order to use your modem you will need to install the two parts of the firmware, extracted by the user space tools; see <http://www.linux-usb.org/SpeedTouch/> for details.
      To compile this driver as a module, choose M here: the module will be called speedtch.


  • Option: USB_CXACRU
    • Kernel Versions: 2.6.15.6 ...
    • (on/off/module) Conexant AccessRunner USB support
    • depends on USB_ATM
    • select FW_LOADER
      Say Y here if you have an ADSL USB modem based on the Conexant AccessRunner chipset. In order to use your modem you will need to install the firmware, extracted by the user space tools; see <http://accessrunner.sourceforge.net/> for details.
      To compile this driver as a module, choose M here: the module will be called cxacru.


  • Option: USB_XUSBATM
    • Kernel Versions: 2.6.15.6 ...
    • (on/off/module) Other USB DSL modem support
    • depends on USB_ATM
      Say Y here if you have a DSL USB modem not explicitly supported by another USB DSL drivers. In order to use your modem you will need to pass the vendor ID, product ID, and endpoint numbers for transmission and reception as module parameters. You may need to initialize the modem using a user space utility (a firmware loader for example).
      To compile this driver as a module, choose M here: the module will be called xusbatm.



Linux Kernel Configuration

Around Wikia's network

Random Wiki