Wikia

How To Wiki

How to configure the Linux kernel/drivers/isdn/hisax

< How to configure the Linux kernel | drivers | isdn

1,794pages on
this wiki
Talk0

Howto configure the Linux kernel / drivers / isdn / hisax



Passive cardsEdit

    • depends on ISDN_I4L


  • Option: ISDN_DRV_HISAX
    • Kernel Versions: 2.6.15.6 ...
    • (on/off/module) HiSax SiemensChipSet driver support
    • select CRC_CCITT
      This is a driver supporting the Siemens chipset on various ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many compatibles).
      HiSax is just the name of this driver, not the name of any hardware.
      If you have a card with such a chipset, you should say Y here and also to the configuration option of the driver for your particular card, below.

ISDN_DRV_HISAX!=n

"D-channel protocol features"


  • Option: HISAX_EURO
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) HiSax Support for EURO/DSS1
      Say Y or N according to the D-channel protocol which your local telephone service company provides.
      The call control protocol E-DSS1 is used in most European countries. If unsure, say Y.


  • Option: DE_AOC
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Support for German chargeinfo
    • depends on HISAX_EURO
      If you want that the HiSax hardware driver sends messages to the upper level of the isdn code on each AOCD (Advice Of Charge, During the call—transmission of the fee information during a call) and on each AOCE (Advice Of Charge, at the End of the call—transmission of fee information at the end of the call), say Y here. This works only in Germany.


  • Option: HISAX_NO_SENDCOMPLETE
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Disable sending complete
    • depends on HISAX_EURO
      If you have trouble with some ugly exchanges or you live in Australia select this option.


  • Option: HISAX_NO_LLC
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Disable sending low layer compatibility
    • depends on HISAX_EURO
      If you have trouble with some ugly exchanges try to select this option.


  • Option: HISAX_NO_KEYPAD
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Disable keypad protocol option
    • depends on HISAX_EURO
      If you like to send special dial strings including * or # without using the keypad protocol, select this option.


  • Option: HISAX_1TR6
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) HiSax Support for German 1TR6
      Say Y or N according to the D-channel protocol which your local telephone service company provides.
      1TR6 is an old call control protocol which was used in Germany before E-DSS1 was established. Nowadays, all new lines in Germany use E-DSS1.


  • Option: HISAX_NI1
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) HiSax Support for US NI1
      Enable this if you like to use ISDN in US on a NI1 basic rate interface.


  • Option: HISAX_MAX_CARDS
    • Kernel Versions: 2.6.15.6 ...

"Maximum number of cards supported by HiSax"

    • default "8"
      This option allows you to specify the maximum number of cards which the HiSax driver will be able to handle.

"HiSax supported cards"


  • Option: HISAX_16_0
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Teles 16.0/8.0
    • depends on ISA
      This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8 and many compatibles.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using the different cards, a different D-channel protocol, or non-standard IRQ/port/shmem settings.


  • Option: HISAX_16_3
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Teles 16.3 or PNP or PCMCIA
      This enables HiSax support for the Teles ISDN-cards S0-16.3 the Teles/Creatix PnP and the Teles PCMCIA.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using the different cards, a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_TELESPCI
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Teles PCI
    • depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K))
      This enables HiSax support for the Teles PCI. See <file:Documentation/isdn/README.HiSax> on how to configure it.


  • Option: HISAX_S0BOX
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Teles S0Box
      This enables HiSax support for the Teles/Creatix parallel port S0BOX. See <file:Documentation/isdn/README.HiSax> on how to configure it.


  • Option: HISAX_AVM_A1
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) AVM A1 (Fritz)
    • depends on ISA
      This enables HiSax support for the AVM A1 (aka "Fritz").
      See <file:Documentation/isdn/README.HiSax> on how to configure it using the different cards, a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_FRITZPCI
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) AVM PnP/PCI (Fritz!PnP/PCI)
    • depends on BROKEN || !PPC64
      This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI". See <file:Documentation/isdn/README.HiSax> on how to configure it.


  • Option: HISAX_AVM_A1_PCMCIA
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) AVM A1 PCMCIA (Fritz)
      This enables HiSax support for the AVM A1 "Fritz!PCMCIA"). See <file:Documentation/isdn/README.HiSax> on how to configure it.


  • Option: HISAX_ELSA
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Elsa cards
      This enables HiSax support for the Elsa Mircolink ISA cards, for the Elsa Quickstep series cards and Elsa PCMCIA.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using the different cards, a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_IX1MICROR2
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) ITK ix1-micro Revision 2
    • depends on ISA
      This enables HiSax support for the ITK ix1-micro Revision 2 card.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using the different cards, a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_DIEHLDIVA
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Eicon.Diehl Diva cards
      This enables HiSax support for the Eicon.Diehl Diva none PRO versions passive ISDN cards.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using the different cards, a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_ASUSCOM
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) ASUSCOM ISA cards
    • depends on ISA
      This enables HiSax support for the AsusCom and their OEM versions passive ISDN ISA cards.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using the different cards, a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_TELEINT
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) TELEINT cards
    • depends on ISA
      This enables HiSax support for the TELEINT SA1 semiactiv ISDN card.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using the different cards, a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_HFCS
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) HFC-S based cards
    • depends on ISA
      This enables HiSax support for the HFC-S 2BDS0 based cards, like teles 16.3c.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using the different cards, a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_SEDLBAUER
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Sedlbauer cards
      This enables HiSax support for the Sedlbauer passive ISDN cards.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using the different cards, a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_SPORTSTER
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) USR Sportster internal TA
    • depends on ISA
      This enables HiSax support for the USR Sportster internal TA card.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_MIC
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) MIC card
    • depends on ISA
      This enables HiSax support for the ITH MIC card.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_NETJET
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) NETjet card
    • depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K))
      This enables HiSax support for the NetJet from Traverse Technologies.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_NETJET_U
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) NETspider U card
    • depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K))
      This enables HiSax support for the Netspider U interface ISDN card from Traverse Technologies. See <file:Documentation/isdn/README.HiSax> on how to configure it using a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_NICCY
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Niccy PnP/PCI card
      This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_ISURF
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Siemens I-Surf card
    • depends on ISA
      This enables HiSax support for the Siemens I-Talk/I-Surf card with ISAR chip. See <file:Documentation/isdn/README.HiSax> on how to configure it using a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_HSTSAPHIR
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) HST Saphir card
    • depends on ISA
      This enables HiSax support for the HST Saphir card.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_BKM_A4T
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Telekom A4T card
    • depends on PCI
      This enables HiSax support for the Telekom A4T card.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_SCT_QUADRO
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Scitel Quadro card
    • depends on PCI
      This enables HiSax support for the Scitel Quadro card.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_GAZEL
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Gazel cards
      This enables HiSax support for the Gazel cards.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_HFC_PCI
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) HFC PCI-Bus cards
    • depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K))
      This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
      For more informations see under <file:Documentation/isdn/README.hfc-pci>.


  • Option: HISAX_W6692
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Winbond W6692 based cards
    • depends on PCI
      This enables HiSax support for Winbond W6692 based PCI ISDN cards.
      See <file:Documentation/isdn/README.HiSax> on how to configure it using a different D-channel protocol, or non-standard IRQ/port settings.


  • Option: HISAX_HFC_SX
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) HFC-S+, HFC-SP, HFC-PCMCIA cards
      This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA cards. This code is not finished yet.
bool ' TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU


  • Option: HISAX_ENTERNOW_PCI
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Formula-n enter:now PCI card
    • depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K))
      This enables HiSax support for the Formula-n enter:now PCI ISDN card.


  • Option: HISAX_AMD7930
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) Am7930 (EXPERIMENTAL)
    • depends on EXPERIMENTAL && SPARC
      This enables HiSax support for the AMD7930 chips on some SPARCs. This code is not finished yet.


ISDN_DRV_HISAX


  • Option: HISAX_DEBUG
    • Kernel Versions: 2.6.15.6 ...
    • (on/off) HiSax debugging
      This enables debugging code in the new-style HiSax drivers, i.e. the ST5481 USB driver currently. If in doubt, say yes.

"HiSax PCMCIA card service modules"


  • Option: HISAX_SEDLBAUER_CS
    • Kernel Versions: 2.6.15.6 ...
    • (on/off/module) Sedlbauer PCMCIA cards
    • depends on PCMCIA && HISAX_SEDLBAUER
      This enables the PCMCIA client driver for the Sedlbauer Speed Star and Speed Star II cards.


  • Option: HISAX_ELSA_CS
    • Kernel Versions: 2.6.15.6 ...
    • (on/off/module) ELSA PCMCIA MicroLink cards
    • depends on PCMCIA && HISAX_ELSA
      This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink card.


  • Option: HISAX_AVM_A1_CS
    • Kernel Versions: 2.6.15.6 ...
    • (on/off/module) AVM A1 PCMCIA cards
    • depends on PCMCIA && ISDN_DRV_HISAX
      This enables the PCMCIA client driver for the AVM A1 / Fritz!Card PCMCIA cards.


  • Option: HISAX_TELES_CS
    • Kernel Versions: 2.6.15.6 ...
    • (on/off/module) TELES PCMCIA cards
    • depends on PCMCIA && HISAX_16_3
      This enables the PCMCIA client driver for the Teles PCMCIA cards.

"HiSax sub driver modules"


  • Option: HISAX_ST5481
    • Kernel Versions: 2.6.15.6 ...
    • (on/off/module) ST5481 USB ISDN modem (EXPERIMENTAL)
    • depends on USB && EXPERIMENTAL
    • select CRC_CCITT
      This enables the driver for ST5481 based USB ISDN adapters, e.g. the BeWan Gazel 128 USB


  • Option: HISAX_HFCUSB
    • Kernel Versions: 2.6.15.6 ...
    • (on/off/module) HFC USB based ISDN modems (EXPERIMENTAL)
    • depends on USB && EXPERIMENTAL
      This enables the driver for HFC USB based ISDN modems.


  • Option: HISAX_HFC4S8S
    • Kernel Versions: 2.6.15.6 ...
    • (on/off/module) HFC-4S/8S based ISDN cards (EXPERIMENTAL)
    • depends on EXPERIMENTAL
      This enables the driver for HFC-4S/8S based ISDN cards.


  • Option: HISAX_FRITZ_PCIPNP
    • Kernel Versions: 2.6.15.6 ...
    • (on/off/module) AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)
    • depends on PCI && EXPERIMENTAL
      This enables the driver for the AVM Fritz!Card PCI, Fritz!Card PCI v2 and Fritz!Card PnP. (the latter also needs you to select "ISA Plug and Play support" from the menu "Plug and Play configuration")


  • Option: HISAX_HDLC
    • Kernel Versions: 2.6.15.6 ...
    • (on/off)
    • depends on HISAX_ST5481
    • default y


  • Option: HISAX_AVM_A1_PCMCIA
    • Kernel Versions: 2.6.15.6 ...
    • (on/off)
    • depends on HISAX_AVM_A1_CS
    • default y




Linux Kernel Configuration

Around Wikia's network

Random Wiki