How To Wiki

How to configure the Linux kernel/drivers/infiniband/ulp/ipoib

< How to configure the Linux kernel | drivers | infiniband | ulp

1,795pages on
this wiki
Add New Page
Talk0 Share

Howto configure the Linux kernel / drivers / infiniband / ulp / ipoib

    • Kernel Versions: ...
    • (on/off/module) IP-over-InfiniBand
    • depends on INFINIBAND && NETDEVICES && INET
      Support for the IP-over-InfiniBand protocol (IPoIB). This transports IP packets over InfiniBand so you can use your IB device as a fancy NIC.
      The IPoIB protocol is defined by the IETF ipoib working group: <>.

    • Kernel Versions: ...
    • (on/off) IP-over-InfiniBand debugging
    • depends on INFINIBAND_IPOIB
      This option causes debugging code to be compiled into the IPoIB driver. The output can be turned on via the debug_level and mcast_debug_level module parameters (which can also be set after the driver is loaded through sysfs).
      This option also creates an "ipoib_debugfs," which can be mounted to expose debugging information about IB multicast groups used by the IPoIB driver.

    • Kernel Versions: ...
    • (on/off) IP-over-InfiniBand data path debugging
      This option compiles debugging code into the data path of the IPoIB driver. The output can be turned on via the data_debug_level module parameter; however, even with output turned off, this debugging code will have some performance impact.

Linux Kernel Configuration

Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.

Also on Fandom

Random Wiki